Configuration File Parameter Guide 104 Back to Contents
VCS752 Administrator and Provisioning Manual
MAC-specific configuration file settings
Setting:
sip_account.x.sip_account_enable
Description: Enables account x to be used by the device.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
sip_account.x.label
Description: Sets the text that identifies the account on the device LCD. The account
label appears on the idle screen, dialing screen, and other call
appearance screens.
Values: Text string Default: Blank
Setting:
sip_account.x.display_name
Description: Sets the text
portion of the caller ID that is displayed for outgoing calls
using account x.
Values: Text string Default: Blank
Setting:
sip_account.x.user_id
Description: Sets the account ID for account x. Depending on your service provider's
specifications, this could be an extension number.
Note: Do not enter the host name (e.g. "@sipservice.com"). The
configuration file automatically adds the default host name.
Values: Text string Default: Blank
Setting:
sip_account.x.authentication_name
Description: Sets the authentication name for account x. Depending on your service
provider's specifications, this could be identical to the user ID.
Values: Text string Default: Blank
Setting:
sip_account.x.authentication_access_password
Description: Sets the authentication password for account x.
Values: Text string Default: Blank
To Next Page
Loading...
