VTech ErisStation VCS752 - Using the Line menu

Configuration Using the Phone Menus 27 Back to Contents
VCS752 Administrator and Provisioning Manual
Using the Line menu
Use the Line menu to configure line-specific settings for the phone.
To use the Line setting menu:
1. From the Admin Settings menu, press
 to highlight Line, and then press SELECT.
The Line menu appears.
2. Highlight the desired line, if necessary, by pressing
, and then press SELECT. The
full configuration menu for that line appears.
You can configure:
 Account label
 Display name
 User ID
 Authorization ID
 Authorization Password
 SIP Registrar Server IP
 Registrar Server port
 Proxy server IP
 Proxy server port
 Register (Yes or No)
 Answer page (Manual or Auto)
For more information about these settings, see “SIP Account Management” on page 33.
3. Edit the Line settings using the dial pad and the soft keys available for each setting:
 —deletes a character
 —enables you to enter numbers, lower case letters, or upper case letters
using the dial pad. The soft key does not appear when the setting accepts numbers
only.
 —saves and applies the new settings
 —enables you to edit the setting (appears for the Password setting)
4. Press
 or  to advance to the next character.
Backspc
123
Save
Edit