Using the WebUI 79 Back to Contents
VCS752 Administrator and Provisioning Manual
Security
On the Security page you can reset the admin password, reset the user password, and
enter web server settings.
The security settings are also available as parameters in the configuration file. See “"web"
Module: Web Settings” on page 125.
Passwords
You can set the administrator password and user password on the WebUI or by using
provisioning. For more information on using provisioning to set passwords, see “"profile"
Module: Password Settings” on page 139.
To change the admin password:
1. Enter the old password (for a new VCS752, the default password is admin).
2. Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters (to a maximum of 15 characters).
3. Click .
To change the User password:
1. Enter the old password (for a new VCS752, the default password is user).
2. Enter and re-enter a new password. The password is case sensitive and can consist of
both numbers and letters (to a maximum of 15 characters).
3. Click .
To Next Page
Loading...
