Using the WebUI 68 Back to Contents
VCS752 Administrator and Provisioning Manual
Servicing Pages
Reboot
To manually reboot the VCS752 and apply settings that you have updated, click .
Time and Date
On the Time and Date page, you can manually set the time and date, and the time and date
formats. You can also set the system time to follow a Network Time Protocol (NTP) Server
(recommended) or you can set the time and date manually.
The time and date settings are also available as parameters in the configuration file. See
“"time_date" Module: Time and Date Settings” on page 115.
To Next Page
Loading...
