VTech ErisStation VCS752 - MAC-Specific Configuration File Settings

Configuration File Parameter Guide 108 Back to Contents
VCS752 Administrator and Provisioning Manual
MAC-specific configuration file settings
Setting: network.nat.masquerading_enable
Description: Enables or disables IP masquerading.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
network.nat.public_ip_addr
Description: Sets the public IP address.
Values: Text string (IPv4) Default: 0
Setting:
network.nat.public_sip_port
Description: Sets the public SIP port.
Values: 1–65535 Default: 5060
Setting:
network.nat.public_rtp_port_start
Description: Sets the public RTP port range start.
Values: 1–65535 Default: 18000
Setting:
network.nat.public_rtp_port_end
Description: Sets the public RTP port range end.
Values: 1–65535 Default: 19000
Setting:
network.ip.dhcp_enable
Description: Indicates whether DHCP is enabled.
Values: 0 (disabled), 1 (enabled) Default: 1
Setting:
network.ip.static_ip_addr
Description: Sets a static IP address for the network.
Values: Text string (IPv4) Default: Blank