VTech ErisStation VCS752 - Using the Web User Interface (WebUI)

Using the WebUI 30 Back to Contents
VCS752 Administrator and Provisioning Manual
Using the Web User Interface (WebUI)
The Web User Interface (WebUI) resides on the VCS752 conference phone. You can
access it using an Internet browser. After you log in to the WebUI, you can configure the
VCS752 on the following pages:
The WebUI also has a System Status page, where you can view network status and
general information about the VCS752. The information on the Status page matches the
Status menu available on the VCS752.
System Contacts
 SIP Account Management (see page 33)
 Call Settings (see page 44)
 User Preferences (see page 46)
 Speed Dial (see page 49)
 Signaling Settings (see page 51)
 Ringer Settings (see page 52)
 Local Directory (see page 57)
 Blacklist
 LDAP (see page 63)
 Broadsoft (see page 66)
 Call History (see page 67)
Servicing
 Reboot (see page 68)
 Time and Date (see page 68)
 Firmware Upgrade (see page 71)
 Provisioning (see page 73)
 Security (see page 79)
 Certificates (see page 80)
 System Logs (see page 82)
Network
 Basic Network Settings (see page 54)
 Advanced Network Settings (see page 55)