Using the WebUI 44 Back to Contents
VCS752 Administrator and Provisioning Manual
Call Settings
You can configure call settings for each account. Call Settings include Do Not Disturb and
Call Forward settings.
The call settings are also available as parameters in the configuration file. See
“"call_settings" Module: Call Settings” on page 129.
General Call Settings
Do Not Disturb
Setting Description
Anonymous Call Reject Enables or disables rejecting calls indicated as
"Anonymous."
Enable Anonymous Call Enables or disables outgoing anonymous calls. When
enabled, the caller name and number are indicated as
"Anonymous."
Setting Description
Enable DND Turns Do Not Disturb on or off.
Incoming calls When set to Show, the phone displays incoming call
information while Do Not Disturb is on. When set to Reject,
the phone rejects incoming calls without alerting the user.
To Next Page
Loading...
