Using the WebUI 70 Back to Contents
VCS752 Administrator and Provisioning Manual
Manual Time Settings
If Enable Network Time is disabled or if the time server is not available, use Manual Time
Settings to set the current time.
Click to start the VCS752 using the manual time settings.
DST End: Month
DST End: Week
DST End: Day
DST End: Hour
If User-defined DST is enabled, set the end date and time
for daylight savings: Month, week, day, and hour.
Daylight Savings Offset If User-defined DST is enabled, this specifies the daylight
savings adjustment (in minutes) to be applied when the
current time is between Daylight Savings Start and
Daylight Savings End.
Use DHCP (Option
2/100/101)
If Enable Network Time is selected, select to use DHCP to
determine the time zone offset. Options 2, 100 and 101
determine time zone information.
Setting Description
Date Select the current year, month, and day. Click the Date
field and select the date from the calendar that appears.
Time Sets the current hour, minute, and second. Click the Time
field, and enter the current time. You can also refresh the
page to update the manual time settings.
Setting Description
To Next Page
Loading...
Need help?
General
