Configuration Using the Phone Menus 28 Back to Contents
VCS752 Administrator and Provisioning Manual
Using the Provisioning menu
Use the Provisioning menu to configure auto-provisioning settings. For more information
about auto-provisioning, see “Provisioning” on page 73 and “Provisioning Using
Configuration Files” on page 84.
On the Provisioning menu you can configure:
Server string—the URL of the provisioning server. The URL can include a complete
path to the configuration file.
Login ID—the username the VCS752 will use to access the provisioning server.
Login PW—the password the VCS752 will use to access the provisioning server.
To use the Provisioning menu:
1. From the Admin Settings menu, press
to highlight Provisioning, and then press
SELECT.
The Provisioning menu appears.
2. Enter the server URL using the dial pad keys:
—deletes a character
—enables you to enter numbers, lower case letters, or upper case letters
with the dial pad. Does not appear when the setting accepts numbers only.
—prompts you to reboot the phone and apply the new settings
—enables you to edit the setting (appears for the Password setting)
The format of the URL must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>"
"<user>:<password>@" may be empty.
"<port>" can be omitted if you do not need to specify the port number.
3. Press
to move to the next line and enter the Login ID for access to the provisioning
server if it is not part of the server string.
4. Press
to move to the next line and enter the Login password.
5. Press .
To Next Page
Loading...
Need help?
General
