VTech ErisStation VCS752 User Manual

Using the WebUI 48 Back to Contents
VCS752 Administrator and Provisioning Manual
Program Dial Keys
The Program Dial feature allows phone users to dial numbers with a single press of a soft
key. On the Program Dial pages, you can configure up to three Program Dial keys. Each
key requires a label (short enough to fit in the soft key’s area), an account and number that
the key will dial, a location where the key will fit between the other soft keys, and the call
modes during which the key will appear.
To enter program dial soft keys:
1. Enter the Program Dial key label. Labels that exceed the width of the soft key will end
with ... when they appear on the phone.
2. Enter a value that the Program Dial key will dial.
3. Select an account that the Program Dial key will use.
4. Select the call modes for which you want the Program Dial key to appear.
5. Select the location for the Program Dial key for the selected call modes. You can place
the key before another key, or place it last in the order.
6. Click .
7. Configure any additional Program Dial keys.

VTech ErisStation VCS752 Specifications

General

Brand	VTech
Model	ErisStation VCS752
Category	Conference Phone
Language	English