VTech ErisStation VCS752 - Page 26

Configuration Using the Phone Menus 26 Back to Contents
VCS752 Administrator and Provisioning Manual
To set other settings (DNS and NTP):
1. From the Network setting menu, press
 or  to highlight Others, and then press
SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error message
appears briefly before returning you to the Network setting menu.
2. Enter the IP address for the primary DNS server. Use the dial pad and the soft
key to enter characters. Press
 or  to advance to the next character.
3. Press
 and enter the IP address for the secondary DNS server. The VCS752 uses
this server if the primary server does not respond.
4. Press
 and enter the IP address for the NTP server. If the VCS752 does not use an
NTP server, you must manually enter the time and date settings.
5. Press .
Add dot
Save