VTech ErisStation VCS752 - Page 123

Configuration File Parameter Guide 123 Back to Contents
VCS752 Administrator and Provisioning Manual
Setting: remoteDir.ldap_incall_lookup_enable
Description: Enables or disables LDAP incoming call lookup. If enabled, the VCS752
searches the LDAP directory for the incoming call number. If the number
is found, the VCS752 uses the LDAP entry for CID info.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
remoteDir.ldap_outcall_lookup_enable
Description: Enables or disables LDAP outgoing call lookup. If enabled, numbers
entered in pre-dial or live dial are matched against LDAP entries. If a
match is found, the LDAP entry is displayed for dialing.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
remoteDir.broadsoft_enable
Description: Enables or disables the Broadsoft phonebook.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
remoteDir.broadsoft_display_name
Description: Sets the Broadsoft Phonebook display name.
Values: Text string Default: Blank
Setting:
remoteDir.broadsoft_server
Description: Sets the Broadsoft Phonebook IP address.
Values: Text string Default: Blank
Setting:
remoteDir.broadsoft_port
Description: Sets the Broadsoft Phonebook port.
Values: 1–65535 Default: 0
Setting:
remoteDir.broadsoft_user_name
Description: Sets the Broadsoft Phonebook authentication user name.
Values: Text string Default: Blank