Configuration File Parameter Guide 128 Back to Contents
VCS752 Administrator and Provisioning Manual
Setting:
user_pref.call_waiting.tone_interval
Description: Sets the interval for the call waiting tone in seconds.
Values: 10–60 Default: 30
Setting:
user_pref.call_waiting.mode
Description: Enables or disables rejecting calls if already on a call.
Values: 0 (disabled), 1 (enabled) Default: 1
Setting:
user_pref.lcd_contrast
Description: Sets the LCD contrast on the VCS752.
Values: 1–7 Default: 4
Setting:
user_pref.backlight
Description: Sets the backlight brightness level.
Values: off, low, medium, high Default: high
Setting:
user_pref.idle_backlight
Description: Sets the backlight brightness level when the VCS752 is idle.
Values: off, low, medium, high Default: off
Setting:
user_pref.absent_timeout
Description:
Sets the absent timeout (the interval after going off hook with no action
taken) in seconds. After the absent timeout, the phone returns to idle mode.
Values: 10–60 Default: 30
Setting:
user_pref.speaker_volume
Description: Sets the speakerphone volume.
Values: 1–9 Default: 5
Setting:
user_pref.key_beep_enable
Description: Enables or disables key beeps on the VCS752.
Values: 0 (disabled), 1 (enabled) Default: 1
To Next Page
Loading...
