14
2. Delivery and set up
2.1 Transporting the machine
We recommend two people to lift the machine, using the positions shown (1).
To do this, a sufficiently dimensioned, at least Ø 20 mm steel rod is pushed through the main spindle.
The machine should be carried and balanced by one person at the steel rod and by the other person,
at the shown position on the opposite underside of the bed..
When lifting, pay attention to an ergonomic stance and sufficient safety!
In the delivered state, the machine feet have two transport straps attached. These secure the machine to
the transportation pallet. They must be removed before setting the machine up.
To Next Page
Loading...
