WABECO D2000 - Technical Data D2400

18
4. Specifications regarding the machine
4.3.1 Technical data for D2400
Working areas
Distance between centres
500 mm
Centre height
110 mm
Swing diameter via guide
126 mm
Bed width
220 mm
Main drive motor
Nominal voltage
230 V
Nominal frequency
50/60 Hz
Nominal performance of the spindle motor
1.4 kW
Spindle revolutions, infinite
30 - 2300 rpm
Machine accuracy
Concentricity of the spindle lug
0.005 mm
Cylindrical rotation on 100 mm overhung
0.01 mm
Cylindrical rotation with simple turning on 300 mm between
the centres
0.015 mm
Headstock
Main spindle aperture Ø 20 mm
Taper in main spindle MK3
Main spindle lug According to DIN 6350
Tool skid
Adjustability of the transverse skid 110 mm
Adjustability of the longitudinal skid 58 mm
Longitudinal skid can be swivelled by 360°
Max. turning steel height 20 mm
Tailstock with quick adjustment
Lateral adjustability of the tailstock upper ± 10 mm
Tailstock sleeve With inner Morse taper MK2
Sleeve adjustability 65 mm
Scale 1 mm
Thread cutting (geared up)
With lead screw and change gear quadrant Right thread
Automatic longitudinal feed 0.085 rpm
Optional
Change gear set for thread cutting
Metric 0.25 – 6.0 mm - imperial 10 - 36 G/"
Automatic longitudinal feeds 0.16 rpm