Contents
Declaration of conformity for D2000 6
Declaration of conformity for D2400 7
Declaration of conformity for D3000 8
1. Important safety notes 9
1.1 Intended use 9
1.2 Improper and incorrect use 9
1.3 Modifications to the machine 9
1.4 Safety regulations for proper use 9
1.5 Safety features 12
1.6 Explanations of the symbols 12
2. Delivery and set up 13
2.1 Transporting the machine 14
3. Putting into operation 15
4. Specifications regarding the machine 15
4.1 Identification of the model 15
4.2 Noise emission declaration for D2000 15
4.2.1 Technical data D2000 16
4.2.2 Dimensions of D2000 17
4.3 Noise emission declaration for D2400 17
4.3.1 Technical data D2400 18
4.3.2 Dimensions of D2400 19
4.4 Noise emission declaration for D3000 19
4.4.1 Technical data D3000 20
4.4.2 Dimensions of D3000 21
4.5 Revolution selection 21
4.6 Diagram for reading off the revolutions 22
4.7 Revolution changer 22
4.8 Electrical equipment 23
5. Achieving optimum results 24
and avoiding incorrect usage
6. Thread cutting and automatic feed 26
6.1 Thread cutting 26
6.2 Use of change gears 27
6.3 Lefthand thread 31
7. Maintenance 32
8. Lubrication of the machine 32
9. Readjusting the main spindle 33
10. Readjusting the tool skid 34
11. Tailstock 35
To Next Page
Loading...
