OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm 3-41
Operation
Protective FOPS structure/canopy – category I (option)
Crushing hazard! Falling objects.
Causes serious injury or death.
☞ Install a protective FOPS structure in areas with danger of falling objects.
☞ Machine operation is prohibited without a protective FOPS structure.
Information!
The protective FOPS structure corresponds to category I according to ISO
3449:1992.
• The machine owner must ensure that the hazard situation is evaluated and that
the national regulations are observed.
• The machine owner must ensure that only work is performed that does not
require any higher protection.
• Accidents cannot be fully avoided despite equipping a machine with protective
structures.
Information!
Protective structures may only be installed or removed by a Wacker Neuson ser-
vice center.
To Next Page
Loading...
