EasyManua.ls Logo

Wacker Neuson 2503

Wacker Neuson 2503
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OM 25-3503 us – Edition 4.1 * 2503_3503b510.fm 5-7
Maintenance
5.5 Engine and hydraulics cooling system
The oil/water radiator is located in the engine compartment, on the right side of the engine.
It cools the diesel engine, and the hydraulic oil of the drive and operating hydraulics.
The coolant reservoir is also located in the engine compartment, in front of the oil cooler.
Specific safety instructions
Dirt on the radiator fins reduces the radiator’s cooling capacity! To avoid this:
Clean the outside of the radiator at regular intervals. Use oil-free compressed air (2
bar/29 psi max.) to clean. Maintain a certain distance from the radiator to avoid dam-
age to the radiator fins. Refer to the maintenance plans in the appendix for the clean-
ing intervals
In dusty or dirty work conditions, clean more frequently than indicated in the mainte-
nance plans
An insufficient coolant level reduces the cooling capacity as well and can cause engine
damage! Therefore:
Check the coolant level at regular intervals. Refer to the maintenance plans in the
appendix for the intervals
If coolant must be added frequently, check the cooling system for leaks and/or con-
tact your dealer!
Never add cold water/coolant if the engine is warm!
After filling the coolant reservoir, make a test run with the engine and check the cool-
ant level again after stopping the engine
The use of the wrong coolant can destroy the engine and the radiator. Therefore:
Add enough antifreeze compound to the coolant – but never more than 50 %. If pos-
sible use brand-name antifreeze agents since they already contain anticorrosion
agents
Observe the coolant compound table
see chapter 6.7 Coolant compound table on page 6-9
Do not use radiator cleaning compounds if an antifreeze compound has been added
to the coolant – otherwise this causes sludge to form that can damage the engine
Once you have filled the coolant reservoir:
Test run the engine
Stop the engine
Let the engine cool down
Check the coolant level again
Environment!
Use a suitable container to collect the coolant as it drains and dispose of it in
an environmentally friendly manner!

Table of Contents

Related product manuals