Wacker Neuson 2503

OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm 3-37
Operation
Interior light
Rotating beacon (option)
Information!
Observe the legal regulations of your country for operating the rotating bea-
con.
Travel signal (option)
A travel signal sounds as soon as at least one of the tracks moves.
DANGER
Accident hazard during forward/backward machine travel.
Serious crushing hazard causing death or serious injury.
• Do not allow anyone to stay in the danger zone.
• Do not rely on the travel signal under any circumstances.
• If the travel signal does not sound, stop machine operation immediately and con-
tact a Wacker Neuson service center (observe the relevant national regulations).
Socket
A 12 V socket (A) is located under the engine cover.
Fig. 113: Switch for interior light
Interior light
ON
☞ Press the switch to the left
OFF
☞ Move switch to center position
Fig. 114: Switch for rotating beacon
47
Rotating beacon (option)
ON
☞ Press switch 47 down
➥ Indicator light in switch 47 illuminates
OFF
☞ Press switch 47 up
➥ Indicator light in switch 47 goes out
Fig. 115: Socket
A