OM 25-3503 us – Edition 4.1 * 2503_3503b610.fm 6-15
Technical datac
6.14 Lift capacity table 3503
All table indications in kg and horizontal position on firm ground without bucket.
If equipped with a bucket or other attachments, lift capacity or tilt load is reduced by bucket
or attachment dead weight.
Calculation basis: according to ISO 10567
The compact excavator’s lift capacity is restricted by the settings of the pressure limiting
valves and the hydraulic system’s stabilizing features.
Neither 75 % of the static tilt load nor 87 % of the hydraulic lift capacity is exceeded.
A
4.5 m
(14'-8")
3.5 m
(11'-5")
2.5 m
(8'-2")
1.5 m
(4´9“)
B
3.0 m
(9'-8")
800*
(1,764*)
545
(1,202)
745*
(1,642*)
685
(1,510)
2.0 m
(6'-6")
840*
(1,852*)
480
(1,058)
870*
(1,918*)
660
(1,455)
1110*
(2,447*)
1105
(2,436)
1.0 m
(3'-3")
890*
(1,962*)
415
(915)
900*
(1984*)
1100*
(2,425*)
620
(1,367)
1795*
(3,957*)
1000
(2,205)
0.0 m
(0'-0")
955*
(2,105*)
420
(926)
955*
(2105*)
1300*
(2,866*)
595
(1,312)
2130*
(4,696*)
930
(2,050)
î1.0 m
(î3'-3")
1045*
(2,304*)
475
(1,047)
1310*
(2,888*)
590
(1,301)
2100*
(4,630*)
950
(2,094)
4200*
(9,259*)
2295
(5,060)
î2.0 m
(
î6'-6")
1150*
(2,533*)
675
(1,488)
1700*
(3,748*)
975
(21,50)
3300*
(7,275*)
2345
(5,170)
Fig. 309: Lift capacity table (model 3503)
max Permissible load on extended stick
A Reach from live ring center
B Load hook height
* Lift capacity limited by hydraulic system
With the stabilizer blade in travel direction
Without the stabilizer blade, 90° to travel direction