OM 25-3503 us – Edition 4.1 * 2503_3503b530.fm 5-27
Maintenance
Threaded fittings and attachments
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞ Engine fastening screws
☞ Fastening screws on the hydraulic system
☞ Line, bucket teeth and pin fastenings on the attachment
Retighten loose connections immediately. Contact a Wacker Neuson service center if nec-
essary.
Pivots and hinges
All mechanical pivot points on the machine (for example door hinges, joints) and fittings
(for example door arresters) must be lubricated regularly, even if they are not listed in the
lubrication plan.
5.14 Lubrication points
Lubricate the lubrication points with the green caps once a week.
Lubricate the lubrication points with the blue caps daily.
To Next Page
Loading...
