3-74 OM 25-3503 us – Edition 4.1 * * 2503_3503b340.fm
Operation
Accident hazard due to tipping over of machine!
Can cause serious injury or death.
• Do not perform any demolition work under the machine. This could cause
the machine to tip over.
• The machine can lose its balance and tip over if a hammer or other heavy
attachment is used.
• Never turn, lower or set down the attachment abruptly.
• Do not extend or retract the boom abruptly.
• Do not use the impact force of the attachment to perform demolition work.
Broken or falling pieces can cause serious injury.
• Machine travel is prohibited during hammer operation.
Information!
If several sizes of hydraulic hammers are available for the machine, the follow-
ing applies when the Powertilt unit is used:
• Always use the smallest possible hydraulic hammer.
• Contact your dealer for information on the correct equipment.