EasyManua.ls Logo

Wacker Neuson 2503

Wacker Neuson 2503
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-42 OM 25-3503 us – Edition 4.1 * * 2503_3503b540.fm
Maintenance
1. Drain engine oil the first time after 50 o/h, then every 500 o/h
2. Replace the engine oil filter the first time after 50 o/h, then every 500 o/h
3. Replace the fuel filter the first time after 500 o/h, then every 500 o/h
4. Replace the hydraulic oil filter insert the first time after 50 o/h, then every 500 o/h
5. Replace the hydraulic oil the first time after 500 o/h, then every 1000 o/h
6. Drain the gearbox oil the first time after 50 o/h, then every 1000 o/h
7. Clean the water ducts every other 1000 o/h servicing
8. Adjust and clean the fuel injection pump every other 1000 o/h servicing
9. Check and adjust injection time every other 1000 o/h servicing
10. Rinse the system to remove dirt. Repeat the procedure in the opposite flow direction.
11. Twice daily when used in water
see chapter 3.54 Powertilt (option 3503) on page 3-97

Table of Contents

Related product manuals