G 150 / 180 / 240 Safety Information
wc_si000265gb.fm 11
Ground
connection
The generator must be connected to a good earthen ground for proper
operating safety!
Ground the generator in accordance with the standards defined in national,
state, and local regulations.
Personal
injury
avoidance
Let the engine and muffler cool before transporting or servicing the machine.
Do not service the machine if your clothing or skin is wet.
Do not allow untrained personnel to service this machine. Only trained
electrical technicians should be allowed to service the electrical components of
this machine.
Service safety
Do not modify the machine without the express written approval of the
manufacturer.
Do not allow water to accumulate around the base of the machine. If water is
present, move the machine and allow the machine to dry before servicing.
When cleaning the unit, do not pressure wash the control panel or any other
electrical components.
..
Replacing
parts and
labels
Replace worn or damaged components.
Use only spare parts recommended by Wacker Neuson.
Keep the fuel lines in serviceable condition. Leaking fuel and flames are
extremely explosive!
Replace all missing and hard-to-read labels. Labels provide important
operating instructions and warn of dangers and hazards.
Check all external fasteners at regular intervals.
To Next Page
Loading...
Need help?
General
