Factory-Installed Options
wc_tx000880gb.fm 58
4 Factory-Installed Options
This machine may be equipped with one or more of the following factory-installed
options. To verify if any of these options are installed on your machine, contact the
Wacker Neuson Corporation at 1-800-770-0957. A nameplate listing the Model
Number, Item Number, Revision, and Serial Number is attached to each unit.
Please have this information available when contacting Wacker Neuson.
Note: The illustrations shown in this chapter represent typical installations. The
factory-installed options on your machine may look different.
4.1 Block Heater
The engine block heater option includes a block heater (a) with a cord (b). The
function of the block heater is to heat the engine coolant/engine block to improve
cold-weather engine starting. Plug the cord into a 120V power supply.
To Next Page
Loading...
Need help?
General
