EasyManuals Logo

Wacker Neuson G 150 User Manual

Wacker Neuson G 150
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
G 150 / 180 / 240 Maintenance
wc_tx000868gb.fm 57
3.8 Maintaining the Trailer
Tires
Keep tires inflated to the proper pressure as shown on the tire sidewall.
Check tread periodically for wear.
Replace tires as required.
Wheels
Check that lug nuts holding wheels are tight.
Replace any missing lug nuts immediately.
Axle Hubs
Grease axle hubs using a good wheel bearing grease.
Brakes
Check operation of brakes before each trip.
Check level of brake fluid in actuator at front of trailer at regular intervals.
Fill brake fluid to approximately 1-inch below top of reservoir using DOT-3
heavy-duty brake fluid.
Tighten filler plug securely.
Note: If fluid level has fallen too low, bleed brake lines to remove any air trapped in
lines. Then fill to proper level with clean brake fluid.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson G 150 and is the answer not in the manual?

Wacker Neuson G 150 Specifications

General IconGeneral
BrandWacker Neuson
ModelG 150
CategoryPortable Generator
LanguageEnglish

Related product manuals