EasyManuals Logo

Wacker Neuson G 150 User Manual

Wacker Neuson G 150
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
G 150 / 180 / 240 Maintenance
wc_tx000868gb.fm 51
3 Maintenance
3.1 Periodic Maintenance Schedule
*Replace the air filter cartridge when yellow indicator of the engine air filter gauge reaches the red line.
**Change the oil after the first 100 hours, then every 250 hours.
***If John Deere antifreeze is used, the flushing interval may be extended. See engine operator’s manual.
Daily
Every 50
Hrs or 2
weeks
Every
250 Hrs
or 10
weeks
Every
600 Hrs
or 12 Mo
Every
1200 Hrs
or 24 Mo
Every
2000 Hrs
Other
Check engine oil and coolant level
Check engine air filter gauge & air
cleaner dust cap *
Visual walkaround inspection
Check tire inflation, tread wear
and lug nuts before towing
Check fuel filter
Service the battery
Change engine oil and replace oil
filter**
Clean unit inside and out
Check air intake hoses, connec-
tions, and system
Replace fuel filter element
Check automatic belt tensioner
and belt wear
Check cooling system
Perform coolant solution analysis
& add SCA's
Grease axle
Pressure test cooling system
Flush cooling system***
Check and adjust engine valve
clearance
Check brake fluid level in trailer at
least monthly
Replace the Racor® filter element
every 750 hours

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson G 150 and is the answer not in the manual?

Wacker Neuson G 150 Specifications

General IconGeneral
BrandWacker Neuson
ModelG 150
CategoryPortable Generator
LanguageEnglish

Related product manuals