G 150 / 180 / 240 Operation
wc_tx000867gb.fm 21
2 Operation
2.1 Application
Generator
application
This machine is a heavy-duty sound-attenuated generator designed to provide
single and three-phase power for construction, commercial, and industrial
applications where reliable power is needed.
.
Safety notices
Do not exceed the power output of the generator. Damage to tools or generator
will occur. Refer to Technical Data.
When using the generator as a standby or substitute power supply, make sure
the voltage and phase rotation of the line connections match those of the utility
lines. Failure to match phase rotation and voltage may cause equipment
connected to the generator to operate incorrectly! This could create unsafe
operating conditions.
Do not exceed the rated current limit of any receptacle.
The bonding bar between the ground connections must remain in place at all
times unless a qualified electrician determines otherwise.
To Next Page
Loading...
Need help?
General
