Setting Up the 600E Pump 157
8.2 Setting Up the 600E Pump
This section describes how to access and use the Pump Setup screen in Gradient Control
mode. It includes the following information:
• Accessing the Gradient Controller Pump Setup screen
• Setting Gradient Controller Pump Setup parameters
• Exiting the Gradient Controller Pump Setup screen
Pump Setup Overview
The Gradient Controller Pump Setup screen includes the following parameters:
• Enable/disable reservoir sparging
• High-temperature limit for an optional column heater
• High and low operating-pressure limits for the system
• External chart output function
• Enable/disable a flow factor to account for flow-path elasticity or eluent
compressibility
• Enable/disable Autostart
• Lock/unlock keyboard
To Next Page
Loading...
