ii
Copyright notice
© 20102011 WATERS CORPORATION. PRINTED IN THE UNITED
STATES OF AMERICA AND IN IRELAND. ALL RIGHTS RESERVED. THIS
DOCUMENT OR PARTS THEREOF MAY NOT BE REPRODUCED IN ANY
FORM WITHOUT THE WRITTEN PERMISSION OF THE PUBLISHER.
The information in this document is subject to change without notice and
should not be construed as a commitment by Waters Corporation. Waters
Corporation assumes no responsibility for any errors that may appear in this
document. This document is believed to be complete and accurate at the time
of publication. In no event shall Waters Corporation be liable for incidental or
consequential damages in connection with, or arising from, its use.
Considerations specific to the column compartments
Warning: Do not use the column heater with solvents that have auto
ignition temperatures below 150 C.
Warning: When dealing with hazardous solvents, run the system in a
hooded environment that provides a sufficient air exchange rate.
Warning: To prevent injury, always observe Good Laboratory Practices
when you handle solvents, change tubing, or operate the column heater.
Consult the Material Safety Data Sheets and the Solvent
Considerations section of the ACQUITY UPLC System Guide regarding
the solvents you use.
To Next Page
Loading...
