Waters contact information (continued)
Contacting medium Information
Conventional mail Waters Corporation
Global Support Services
34 Maple Street
Milford, MA 01757
USA
Safety considerations
Some reagents and samples used with Waters instruments and devices can pose chemical,
biological, or radiological hazards (or any combination thereof). You must know the potentially
hazardous effects of all substances you work with. Always follow Good Laboratory Practice
(GLP), and consult your organization’s standard operating procedures as well as your local
requirements for safety.
Safety hazard symbol notice
Documentation needs to be consulted in all cases where the
symbol is used to find out the
nature of the potential hazard and any actions which have to be taken.
Power cord replacement hazard
Warning: To avoid electric shock, use the SVT-type power cord in the United States
and HAR-type (or better) cord in Europe. The main power cord must be replaced only
with one of adequate rating. For information regarding what cord to use in other
countries, contact your local Waters distributor.
Hand crush hazard
Warning: To avoid hazards associated with the reciprocating or rotating parts in the
source, keep hands clear of the regions marked with yellow and gray labels.
High voltage hazard
Warning: To avoid electric shock, do not remove protective panels from system
modules. The components within are not user-serviceable.
August 8, 2016, 715005049 Rev. C
Page iv
To Next Page
Loading...
