Waters ACQUITY - Source Exhaust Tubing

Table B–4: Wavelength cutoffs for different mobile phases (continued)
Mobile phase UV cutoff (nm)
Polyoxyethylene (35) lauryl ether (BRIJ 35), 0.1% 190
3-[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate) (CHAPS) 0.1% 215
Diammonium phosphate, 50 mM 205
(Ethylenedinitrilo) tetraacetic acid disodium salt (disodium EDTA), 1 mM 190
4-(2-hydroxethyl)-1-piperazineet hanesulfonic acid (HEPES), 10 mM, pH 7.6 225
Hydrochloric acid, 0.1% 190
Morpholinoethanesulfonic acid (MES), 10 mM, pH 6.0 215
Potassium phosphate, monobasic, 10 mM 190
Potassium phosphate, dibasic, 10 mM 190
Sodium acetate, 10 mM 205
Sodium chloride, 1 M 207
Sodium citrate, 10 mM 225
Sodium dodecyl sulfate 190
Sodium formate, 10 mM 200
Triethylamine, 1% 235
Trifluoracetic acid, 0.1% 190
TRIS HCl, 20 mM, pH 7.0 202
TRIS HCl, 20 mM, pH 8.0 212
Triton X-100, 0.1% 240
Waters PIC Reagent A, 1 vial/liter 200
Waters PIC Reagent B-6, 1 vial/liter 225
Waters PIC Reagent B-6, low UV, 1 vial/liter 190
Waters PIC Reagent D-4, 1 vial/liter 190
August 8, 2016, 715005049 Rev. C
Page 97