Watts AERCO Benchmark BMK5000 User Manual

Benchmark with Edge [I]: Operation-Maintenance Manual
SECTION 2: OPERATION
OMM-0145_D • GF-218 • 11/2/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 14 of 213
2.2 LOGIN AND PASSWORD ENTRY
The Edge [i] Controller has multiple levels of password protection.
Level
Password
Description
1
No password
The default. Many parameters are visible but “Read Only.”
2
159
Allows routine maintenance to be performed. Appropriate for AERCO
Trained Technicians (ATT).
A higher-level password is reserved AERCO Master Technicians (AMT). It is distributed on an
individual basis.
To enter a password:
1. On the Edge [i] Controller, go to Main Menu → Advanced Setup → Access. The Enter
Password screen appears.
2. Use the number keypad to enter the password (each number appears as a *), then press
Save. You will have access to the functionality associated with the level of the password
entered.
Figure 2.2: Enter Password Screen
3. Once you have successfully logged into the system, the Main Menu appears. All Edge
functionality is accessed through one of the six Main Menu items.
Figure 2-3: Edge [i] Controller Main Menu
NOTE:
Full instructions for using the Edge [i] Controller are in the Edge [i] Controller Manual (OMM-
0141, GF-213-B).

Watts AERCO Benchmark BMK5000 Specifications

General

Brand	Watts
Model	AERCO Benchmark BMK5000
Category	Boiler
Language	English