Benchmark with Edge [I]: Operation-Maintenance Manual
SECTION 2: OPERATION
OMM-0145_D • GF-218 • 11/2/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 15 of 213
2.3 MENU STRUCTURE
The Main Menu give you access to all Edge [i] Controller user functionality. There are four
major divisions within the menu structure.
Figure 3.3: The Edge [i] Controller Main Menu
2.3.1 Unit Status Menu
The Unit Status menu contains the following sections and parameters. Unlike other Edge
menus, navigation starts at the Unit Status screen and proceeds from there by scrolling right.
The target Fire Rate (0% to 100%).
The current Fire Rate (0% to 100%).
The current Flame Strength (0% to 100%).
The current Inlet Water temperature
The unit’s current Setpoint.
The current Outlet temperature.
The current Air Inlet temperature.
The current Exhaust temperature.
Main Menu → Plant Status – BST Manager Only
The reading of the outside temperature meter
The BST cascade’s current Setpoint.
The supply temperature reading.
The inlet temperature reading.
The number of units in the BST cascade.
The number of units in the BST cascade firing.
The number of units in the BST cascade online.
The fire rate for the BST cascade.
Main Menu → BST Cascade Status – BST Manager Only
The fire rate for the BST cascade.
The number of units in the BST cascade online.
The BST cascade’s current Setpoint.
The number of units in the BST cascade available.
The supply temperature reading.
To Next Page
Loading...
