上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
21 / 52
Taking loading a program file in the local as an example, to load a program file, do
the following:
1. To enter into Local File interface, press → A:
2. Press ↑ / ↓, and select the target program file.
3. Press F1. The system automatically loads the file.
After finishing, the file name automatically shows on the top of the screen.
If you need to unload the file, press F2.
You can also load a program file generated by wizard or load a program task.
See Generate a Wizard File and Execute the Program Task for details.
To Next Page
Loading...
Need help?
General
