上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
20 / 52
3 Quick Start
Through this section, you can quickly know how to use NK260/NK280/NK280B.
Machining processes include the following:
1. Return to the machine origin.
2. Load a program file.
3. Execute fixed calibration.
4. Set the workpiece origin.
5. Execute machining.
3.1 Return to the Machine Origin
This operation is used to adjust the coordinate system before machining.
To return to the machine origin, do one of the following:
• For an absolute encoder, skip the operation.
See Set Datum with an Absolute Encoder for the reason.
• For an incremental encoder, return to the machine origin with an incremental
encoder.
See Return to the Machine Origin with an Incremental Encoder for details.
3.2 Load a Program File
This operation is used to load a program file stored in the host or a USB flash disk
for machining.
Before loading a program file, do one of the following to prepare a program file:
• Put a program file in the host or a USB flash disk.
• Press F7 in Local File interface, create a program file, and press F1 to save it.
To Next Page
Loading...
Need help?
General
