上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
41 / 52
5.4 Check System Logs
This operation is used to view important operations and system events since this
time start-up and in history for troubleshooting.
System logs include the following types:
• System startup and shutdown
• Start and stop of automatic machining
• Change of workpiece offsets
• System alarms
• Prompts about machining
• Other system information
To check system logs, do the following:
1. To enter into Log interface, press → B:
2. Check different types of system logs:
– To check all logs, press F1. It is pressed by default.
– To check today’s logs, press F2.
To Next Page
Loading...
