WEIHONG 200 Series User Manual

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
40 / 52
To back up system parameters, do the following:
1. To enter into Param Backup interface, press → B:
2. To back up current parameter settings to factory setting, press F6.
3. To export parameter settings to a USB flash disk, press F2.
After restarting the system, the exported time shows in Param Backup
interface.
In Param Backup interface, you can also do the following:
• To import a parameter file in a USB flash disk into the system, press F3.
• To recover parameter setting to a desired backup time, press ↑ / ↓ to select the
desired time, and press F1.
• To delete backup parameters, press F7. The system deletes backup time and
backup parameter settings.

WEIHONG 200 Series Specifications

General

Brand	WEIHONG
Model	200 Series
Category	Control Systems
Language	English