上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
51 / 52
6.3 Maintain the System
This operation is used to update the system and delete temporary files.
Before maintaining the system, ensure that a USB flash disk with an updated file has
been inserted.
To maintain the system, do the following:
1. To enter into System Info interface, press → C.
2. Press F2, and select a maintenance item:
– F1: delete temporary files. Manufacturer password is required.
– F2: update the system.
6.4 Use NcCloud Assistant
This operation is used to use NcCloud Assistant to provide data interface and
communication protocols.
NcCloud Assistant is a built-in application in the system.
To use NcCloud Assistant, do the following:
1. Press → C to enter into System Info interface.
2. Press F5, and follow steps in NcCloud Assistant dialog box.
See NcCloud Assistant User Manual for details.
6.5 Set the Network
This operation is used to realize two-way transmission between the integrated CNC
system and PC after establishing correct connection with PC.
See NK260 Networking for details.
To Next Page
Loading...
Need help?
General
