WEIHONG NK200 - Page 130

Specialized Concentrated Focused
「118」Driver
Para. No.
Function
Value
Description
Pn010-3
Set rotation direction
of motor
1
Value
Function
0
Input positive order, motor rotates
anti-clockwise.
1
Input positive order, motor rotates
clockwise.
Pn021
Electronic gear ratio
numerator
5
The input pulse amount will be multiplied with this
number before output. Ratio range of parameter 21 to
22:
1/127＜parameter 21/ parameter 22＜127
Pn022
Electronic gear ratio
denominator
1
The input pulse amount will be multiplied with this
number before output. Ratio range of parameter 21 to
22:
1/127＜parameter 21/ parameter 22＜127
Pn011-4
Set the value of
Pin20 of CN1
1
Value
Function
0
Output of “0” speed signal
1
Output of brake signal
Pn013-1
Set the maximum
pulse frequency
received by the
driver under position
control mode
7
It can correct the phenomenon of unauthorized
over-travel. 7 means frequency received is 200Kpps.
CAUTION
For the parameter setting of driver of various brands, refer to the driver manual of specific brand.