Specialized Concentrated Focused
「64」Operation
Fig. 3-51 Rectangular Pocket
3.13.2 Array Processing
The system supports array processing on the same program.
Press SF1 to enter [Auto] function section → press F3 to switch to the program wizard interface → press
F6 to enter array processing, as shown below.
Fig. 3-52 Array Processing
First press F3 to select file to be array processed, and then set array rows, array columns, grid rows and
grid columns and press Enter to generate array files.
Press F1 to load the generated array files into the system; press F2 to unload the current file; press F7 to
return to the previous interface.
To Next Page
Loading...
