Specialized Concentrated Focused
Operation「65」
The array processing does not support such command as G65 and G92, or sub-programs in tool path. When they
exist in tool path, the system wiil prompt to delete manually or automatically.
3.13.3 Program File
Press SF5 to enter [Program] function section, as shown in Fig. 3-53.
Fig. 3-53 Program File Interface (Before loading a program)
On the upper part of this screen, processing files in the system are displayed with their size and
modification time; on the lower part, currently loaded file is displayed with its size, total line and file
loading progress. After a processing file is loaded, the screen is as shown in Fig. 3-54.
Fig. 3-54 Program File Interface (After loading a program)
To Next Page
Loading...
