WEIHONG NK200 - Mounting Dimensions

Specialized Concentrated Focused
「4」Overview
1.2.2 Mounting Dimensions
After NK200 is installed on the machine tool, 100 mm space should be preserved in its surrounding for
convenience of wiring and ventilation in the cabinet.
The integral thickness of NK200 system is 108.7mm, including front panel and chassis. Hereinto, the
thickness of front panel is 5mm, and the thickness of rear chassis is 55.2mm. And the mechanical
dimension diagram of NK200 is as shown in Fig. 1-4 (Unit: mm). The cutout of NK200 is as shown in Fig.
1-5(Unit: mm).
机构尺寸图
370
196
356
230
9595
83.2
328
108.7
55.2
Fig. 1-4 Mounting Dimension of NK200
钣金开孔图
190
219
346
356
6-Φ5
Fig. 1-5 Cutout of NK200