WEIHONG NK200 - Page 95

Specialized Concentrated Focused
Operation「83」
Parameter
Definition
Setting Range
Y change tool
position
Y-axis machine coordinate of spindle in
tool change, generally used in disk
magazine parameter settings
-
X coordinate of
tool change ahead
position
X coordinate of deceleration position
before entering tool magazine
-
Y coordinate of
tool change ahead
position
Y coordinate of deceleration position
before entering tool magazine
-
Z coordinate of tool
change ahead
position
Z coordinate of deceleration position
before entering tool magazine
-
Tool change speed
Spindle speed in tool change
0.001~max. speed of each axis
mm/min
Z-axis CT up and
CT down speed in
tool change
The speed of Z moving to the upper
position and lower position in tool change
0.001~tool change speed
mm/min
Traversing speed
in/out tool
magazine
In machine tool change, the speed is used
for traversing in/out tool magazine.
0.001~tool change speed
mm/min
Tool change delay
Pause time in tool change
0~600000 ms
MovetoOrigPositio
nAfterChangeTools
After tool change, back to the position
where the tool stood before tool change
False: Not back
True: Back