110 EN LIFE-BASE
WM 68331 04/2021
7 Disassembly
7 Disassembly
This section describes the disassembly of all versions of
the portable unit and accessories. If there are significant
differences in the disassembly of the versions, these are explained.
Otherwise, disassembly is the same for all versions.
7.1 Removing the protective bag from
the portable unit
7.1.1 Removing the protective bag for
LIFE-BASE light
1. Place the protective bag on a flat, firm surface.
2. Open the hook and loop fasteners on the front and back of
the protective bag.
3. If available: Pull the breathing circuit on the front through
the opening on the protective bag.
4. Remove the portable unit from the protective bag.
Result The protective bag is removed from the portable unit.
To Next Page
Loading...
Need help?
General
