86 EN LIFE-BASE
WM 68331 04/2021
5 Function check
5.8 Checking the bag
This section describes the function check for all bags which can
be used with the portable unit. Depending on the bag you have
purchased, not all the parts described in this section may be
available for testing.
1. Open the zippers fully on both sides.
When doing so, note: The zippers must not get stuck.
2. Open the snap fasteners.
3. Close the snap fasteners.
When doing so, note: The snap fasteners must not pop
open again.
4. Open the hook and loop fasteners.
When doing so, note:
• The hook and loop fasteners must be free of impurities.
• The loop parts of hook and loop tape must not be worn.
5. Open the clips.
6. Close the clips.
When doing so, note:
• The clips must not get stuck.
• The clips must not be tilted.
• The clips must engage securely when closing.
7. Open the magnetic locks.
8. Close the magnetic locks.
When doing so, note: The magnetic locks must not pop
open again.
9. If the bag does not function perfectly: Replace the bag.
Result The bag has been checked.
To Next Page
Loading...
Need help?
General
