Weinmann LIFE-BASE Series - If Available: Connect the Device to the Power Supply According to the Instructions for Use; With MEDUMAT Standard Place the Cable for the Power Supply in the Cable Clamp

WM 68331 04/2021
LIFE-BASE EN 65
4 Assembly
6. Use 6 screws 100 and 6 protective disks 104 to screw
the spacer plate to the devices.
7. If available: Connect the devices to the power supply
according to the instructions for use.
8. With MEDUMAT Standard
2
and MEDUVENT Standard:
Place the cable for the power supply in the cable clamp 105.
100
104
10 mm
MEDUCORE Standard
2
MEDUMAT Standard
2