WM 68331 04/2021
LIFE-BASE EN 123
7 Disassembly
3. Pull the oxygen cylinder out of the cylinder brackets.
Result The oxygen cylinder is removed from the portable unit.
7.5 Removing the device from the
portable unit
7.5.1 Preparing disassembly
1. If available: Remove the portable unit from the wall mounting
or ceiling mounting (see "6.2 Removing the portable unit from
the wall mounting or ceiling mounting", page 92)
or
Remove the portable unit from the pole or equipment rail
(see "6.4 Removing the portable unit from the pole or
equipment rail", page 103).
2. If available: Remove accessories from the device.
3. If available: Remove the oxygen cylinder from the portable unit
(see "7.4 Removing the oxygen cylinder from the portable
unit", page 121).
4. If available: Remove the protective bag from the portable unit
(see "7.1 Removing the protective bag from the portable
unit", page 110).