Weinmann LIFE-BASE Series - Page 96

96 EN LIFE-BASE
WM 68331 04/2021
6 Operation
6.3.2 Fastening the portable unit with hangers
Applies to • LIFE-BASE 1 NG
• LIFE-BASE 1 NG XL
• LIFE-BASE III
• LIFE-BASE 3 NG
• LIFE-BASE 4 NG
1. Undo the knurled screws.
2. Pull out the hangers.
3. Adapt the hangers to the diameter of the pole or
equipment rail.
4. Tighten the knurled screws.