120 EN MEDUMAT Standard
2
WM 68071 05/2021
6 Operator menu
6 Operator menu
6.1 Navigating the operator menu
1. Switch on the device.
The start menu appears.
2. Briefly press the menu button .
3. Select the menu item Operator menu.
4. Turn the right-hand navigation knob to enter the first digit of
the access code.
5. Press the navigation knob next to confirm the first digit of the
access code.
6. Enter the other digits of the access code in the same way.
7. Press the navigation knob ok to confirm the access code.
The operator menu appears on the display.
On delivery, the access code for the operator menu is 000000.
After commissioning the device, the access code must be changed
by the operator to prevent the device configuration from being
changed unintentionally: Operator menu | Change access code.
To Next Page
Loading...
Need help?
General
